ハンディオシロスコープ
測定機 > ハンディオシロスコープ > DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B
     
  前の商品 DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B 次の商品
 
 
DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B
DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B DSO-1102B 携帯型オシロスコープ 100MHz帯域  ハンテック DSO-1102B
     
価格 : 71,980円(税込)
ショップポイント : 719
数量 :    売り切れ
 
 
 
 
 
 
 
 
ハンディタイプで現場測定に最適なオシロスコープです。

Model DSO1202B DSO1102B DSO1062B
Oscilloscope mode
Bandwidth 200MHz 100MHz 60MHz
Real-time Sample Rate 1GSa/s
Equivalent Sample Rate 25GSa/s
Record Length(Sample Points) Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range 2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy 500ps
Vertical
A/D Converter 8-bit resolution
VOLTS/DIV Range 2mV/div〜5V/div at input BNC
Position Range ±50V(5V/div),±40V(2V/div〜500mV/div),2V(200mV/div〜50mV/div)±400mV(20mV/div〜2mV/div)
Rise Time at BNC ≤1.7ns ≤3.5ns ≤5.8ns
DC Gain Accuracy ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity
(Edge Trigger Type)
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
AC: Attenuates signals below 10Hz

HF Reject: Attenuates signals above 80kHz

LF Reject: Attenuates signals below 150kHz

Noise Reject: Reduces trigger sensitivity
Trigger Level Range CH1,CH2: ±8 divisions from center of screen
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns)
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)


 
Holdoff Range 100ns-10s
Trigger Type
Edge Trigger on the rising or falling edge
Pulse Width Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s
Video Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
Slope Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s
Overtime from the rising or falling edge
Set Time: 20-10s
Alternate Internal trigger on edge, pulse width, video or slope
Measurement
Cursors Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
Tracing: The voltage and time at a waveform point
Automatic(32) Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
Meter Mode
Max.Resolution 6,000 Counts
DMM Testing Modes Voltage, Current, Resistance, Capacitance,Diode & Continuity
Max. Input Voltage AC: 600V, DC: 800V
Max. Input  Current AC: 10A, DC: 10A
Input Impedance 10 MΩ
Display
Type Right angle 5.6 16-digit color LCD
Resolution 640*480 dots
Contrast 16 gears, with the progress bar to show adjustment
Interface USB host and USB slave, Lan Optional
Power Supply
Voltage  DC Input:12--17VDC, 1500mA
Mechanical
Size 245 x 163 x 52 (mm)
Weight 1.3KG (exclusive of packing and accessories)

 
Software:
Operating system: Windows 7,Windows NT, Windows 2000, Windows XP ,VISTA
 
  • High Bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
  • 1M Memory Depth.
  • High Refresh Rate (2500 frames)
  • Large 5.6 inch TFT Color LCD Display,High Resolution(640*480), Dual-Window Design --More clear,
    More Detailed
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable
    display of virtually any waveform
  • Easy-to-use pop-up menu with built-in multi-language help system
  • 23 Automatic Measurements
  • Waveform Math: Add, Subtract, Multiply, and Divide
  • Store and recall over
  • Automatic cursor tracking measurements
  • XY Mode
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic
    content and distortion in systems
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record
     length of 1000 frames
  • Pass-Fail function compares a stored waveform to an unknown input
  • Average Mode for smoothing waveforms
  • Square Wave Output (2V, 1kHz) for probe adjustment
  • USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
  • Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
 
 

ページトップへ